다운로드 Enigma Semi-Full PRO - v4.4.01

BimmerCode for BMW and Mini Premium APK MOD APK, Car Launcher Pro APK Paid MOD APK, FIXD - Vehicle Health Monitor, TELUS Drive+, OBD JScan, Car-Check - UK Car Check만큼 좋은 애플리케이션가 꽤 있고 자동차 장르의 위대한 애플리케이션 중 하나 인 Enigma Semi-Full PRO - v4.4.01도 있습니다.

DILTS-JAPAN에서 개발 한 Enigma Semi-Full PRO - v4.4.01는 Android 버전이 Android 4.0+ 이상이어야합니다. 따라서 필요한 경우 휴대 전화를 업데이트해야합니다.

Enigma Semi-Full PRO - v4.4.01 최신 버전은 4.4.01, 출시일은 2019-09-04이며 크기는 2.2 MB입니다.

Google Play에서 1000 다운로드에 대한 통계를 확인할 수 있습니다. 원하는 경우 Android 기기에 개별적으로 다운로드하거나 설치된 앱을 업데이트 할 수 있습니다. 앱을 업데이트하면 최신 기능에 더 많이 액세스하고 보안을 강화할 수 있습니다. 응용 프로그램의 안정성.

모든 게임이나 앱이 모든 휴대 전화와 호환되는 것은 아니기 때문입니다.이 게임이나 애플리케이션은 기기에서 사용할 수 없습니다. Android OS 버전, 화면 해상도 또는 Google Play에서 액세스를 허용하는 국가에 따라 다릅니다. 따라서 APK4Share에서 다음 작업을 할 수 있습니다. APK 파일을 쉽게 다운로드 할 수 있으며 이러한 제한이 적용되지 않습니다.

Enigma Semi-Full PRO mode This application is dedicated to operation.This application is for Enigma Semi-Full only. It can not be used for the conventional ENIGMA and FirePlus series.This application is only for PRO mode which can set the ignition time. Professional knowledge is required to set the ignition timing. EASY mode has special application which can make adjustment from ignition timing of normal ECU without advanced expert knowledge.This application can be downloaded for free. When it is free, you can connect with all Enigma Semi-Full, but only the tachometer screen is displayed. (Only tachometer and TPS are displayed).In order to set various functions of Enigma Semi-Full, you need to purchase the model data corresponding to Enigma Semi-Full you have from the model selection screen.When purchasing and selecting model data, the following functions can be used.· Preset data combined are prepared. Preset data can be easily written to Enigma Semi-Full.· The ignition timing of 0 - 60 degrees can be adjusted for each engine rotation / throttle position. It is also possible to set the dwell time.- The fuel injection amount can be set for each engine rotation / throttle position.- Fuel correction at idling can be performed.- Adjustment of fuel injection time by engine temperature and intake air temperature is possible.- It is possible to set injection timing at each rotation speed.- Various maps can be displayed in 3D graph.- Two maps can be put inside Enigma Semi-Full, and it can be switched with an external switch.- In real time, you can display tachometer, throttle opening monitor, injector opening / closing rate, oil / water · engine temperature (depending on model).- Display the current engine speed and throttle position in real time in the fuel map.- Revolution Limit can be set .- Pit-in limit can be set (Applicable model only)- Digital acceleration pump can be set.- It is possible to correct the TPS sensor according to the actual machine.- You can make several fuel data and save it, you can change it immediately when you need it.- It corresponds to Japanese and English.Note You can not connect to some terminals manufactured by Fujitsu or not made in Japan's due to problems on the terminal side. Please note that you purchase. (You can check whether you can connect with your Android terminal before purchasing model data.)Pairing setup is required before connecting. When pairing and when connecting for the first time after pairing, keep the distance to Enigma Semi-Full as close as possible to within 30 cm.There is no direct linkage function of data with other Androrid terminal, PC version or iOS version. Migrate the data via Enigma Semi-Full.Refunds on model add-ins purchased in in-app billing are not accepted basically.Please be careful that there are no mistakes in model.This application contains deliverables distributed under license of Apache License, Version 2.0.

4.4.01-CYGNUS-X SE44J-Correct MAP TYPE of IDLE AREA4.4.00-Fixed problem can select MAP2 at preset map write.4.3.00-First release-JOGZR SA39J