다운로드 CarBit ELM327 OBD2 - v3.4.8

다운로드 CarBit ELM327 OBD2 - v3.4.8
Package Name com.mda.carbit
Category ,
Latest Version 3.4.8
Get it On Google Play
Update October 20, 2021 (3 years ago)

Car-Check - UK Car Check, Ulysse Speedometer Pro APK Patched v1.9.90 MOD APK, ProTool, Car Launcher Pro APK Paid MOD APK, VNET GPS, RealDash APK 잠금 해제 MOD APK만큼 좋은 애플리케이션가 꽤 있고 자동차 장르의 위대한 애플리케이션 중 하나 인 CarBit ELM327 OBD2 - v3.4.8도 있습니다.

MDA VRP에서 개발 한 CarBit ELM327 OBD2 - v3.4.8는 Android 버전이 Android 4.0+ 이상이어야합니다. 따라서 필요한 경우 휴대 전화를 업데이트해야합니다.

CarBit ELM327 OBD2 - v3.4.8 최신 버전은 3.4.8, 출시일은 2021-10-19이며 크기는 6.8 MB입니다.

Google Play에서 1000 다운로드에 대한 통계를 확인할 수 있습니다. 원하는 경우 Android 기기에 개별적으로 다운로드하거나 설치된 앱을 업데이트 할 수 있습니다. 앱을 업데이트하면 최신 기능에 더 많이 액세스하고 보안을 강화할 수 있습니다. 응용 프로그램의 안정성.

모든 게임이나 앱이 모든 휴대 전화와 호환되는 것은 아니기 때문입니다.이 게임이나 애플리케이션은 기기에서 사용할 수 없습니다. Android OS 버전, 화면 해상도 또는 Google Play에서 액세스를 허용하는 국가에 따라 다릅니다. 따라서 APK4Share에서 다음 작업을 할 수 있습니다. APK 파일을 쉽게 다운로드 할 수 있으며 이러한 제한이 적용되지 않습니다.

CarBit ELM327 OBD2 - v3.4.8

The application for car diagnostics allows you to display data from various electronic vehicle blocks using the ELM327 OBDII adapter, display graphics in real time, and also save them and view them later, shows and Resets engine fault codes / DTC trouble codes.It is possible to configure the min/max value for each sensor/PID, at which output, an “alarm” will be triggered.Supports Bluetooth ELM327 and Wi-Fi ELM327 OBD adapters.It is better to use adapters V1.5, to V2.1 a lot of complaints about incorrect work.Attention!ELM327 chips work only with cars with OBD2 support:Cars manufactured in the USA since 1996,In the Europe countries since 2001. (gasoline cars) and since 2003. (diesel),In Japan, since ~ 2000.In addition to standard OBDII parameters, special ones are supported, for differentcar brands, the following options are now available: BMW - (DIESEL) BYD - (MT20U, ABS) Chery - (MT20U, MT20U2, ActecoME797) Chrysler/Dodge - (DIESEL, AT) Citroen - (C4, C5, Sagem2000, CAN/AT6, EDC16C3 , MEV17.4.2) Daewoo - (SiriusD42) Fiat - (IAW49F, IAW5SF) Ford - (ECU, PWM/AT, PWM/ABS, CAN/DIESEL, CAN/AT, CAN/TPMS, CAN/ABS ) Geely - (MT20U, MT20U2, M797) GM/Chevrolet/Pontiac - (ECU, AT, ABS, SiriusD42) GreatWall - (MT20U2, EOBD, CAN/4D20) Honda - (Fit, Accord, CRV/DIESEL) Jeep - (ECU, DIESEL, AT, TPMS) KIA, Hyundai -~15 PIDs for each model(ATF Temperature, Knock detected and etc) Land Rover - (RANGE/3.6L, DISC4/3.0L, DISC3/TD6, FL2/TD4) Lifan - (MT20U, MT20U2, ActecoME797, ME1788, ABS) Mazda - (ECU, AT, ABS, CAN/TPMS, CAN/SWA) Mercedes - (W203/CDI, W169/CVT, W168) Mitsubishi - (CAN/ECU, CAN/CVT, CAN/SS4II, CAN/AWC, MUT/OBD, MUT/GDI) (Once again, Mitsubishi until ~2000(2000 50/50) does not support OBD, so can not work with ELM327) Nissan - (CAN/ECU, CAN/CVT, CAN/AWD, CAN/METER, CONSULT2) Opel - (ECU, AT, ABS, X18XE, Z16XE, Y17DT, CDTI1.6L, CDTI1.3L) Peugeot - (MEV17.4.2, EDC16C3, ME744, AL4/CAN, AL4/KWP) Renault - (CAN/ECU, CAN/DIESEL, KWP/DIESEL, Sagem2000, KWP/EMS3132) Skoda - (А7/MK3) SsangYong - (KWP/ECU, KWP/AT5, D20DT, CAN/D20DTF, CAN/DSI6) Subaru - (ECU, ECU/DIESEL, SSM2, SSM2/DIESEL, SSM2/AT, KWP/ABS) Suzuki - (CAN/ECU, KWP/ECU) Toyota - (CAN/ECU, KWP/ECU, Prius10,Prius20,Prius30/Alpha,Prius30/AC) VAG - (TDI/2.5L) Volvo - (D5/P3) VAZ - (Yanvar 7.2, Itelma VS5.1 R83, Itelma M73, Itelma M74 KWP/CAN, AT/JATCO, AMT/ZF) GAZ - (MIKAS10.3/11.3,MIKAS11/E2) ZAZ - (MIKAS10.3/11.3) UAZ - (MIKAS10.3/11.3,MIKAS11/E2) The list of models and parameters will be updated...Not all PIDs from the list for a certain car brand can be supported by your car, for convenience you can select the types of the required PIDs in the "Settings / PID types"For certain brands of cars (currently some Mitsubishi models), have the ability to control various systems (turn on a cooling fan, a gasoline pump, etc.)To read the MUT parameters and control the actuators on Mitsubishi models with CAN bus(Montero/Pajero IV, Outlander 2, etc.), you need to create a profile with the ISO 9141-2 protocol, and in the remaining profiles (for reading CAN parameters) leave the protocol ISO 15765-4 CAN (11bit 500K) or automatically.Not all Mitsubishi CAN-bus models support ISO 9141-2 connectivity.So there are ample opportunities for creating your own parameters.

- Added PIDs for K4M, H4M Vesta / Largus engines- The selection of available sets of sensors/PID for convenience has been moved to the left sliding menu.- Various fixes

Show more